cancel
Showing results for 
Search instead for 
Did you mean: 

802.1x authentication

802.1x authentication

muthu_naganatha
New Contributor
Hi Team,

I need to configure the 802.1X authentication in Summit X440 -24p-10g switch.

I have NPS server in our environment .

Server details :- Ip address 192.168.1.74

Subnet :- 255.255.255.0

Gateway :- 192.168.1.1

Switch details :- Vlan 1 Ip address :- 192.168.1.4

Kindly provide setup by step command based on this Ip details .

In NPS already working and I configured so not required NPS document only I required what I need to configure in switch level with proper command.




11 REPLIES 11

Hi Muthu,

As you configured the IP address 192.168.1.4 in VLAN 1, you need to change the "vr-Mgmt" to "vr-Default".

BR
GTM-P2G8KFN