I have a X460G2-24x-10G4 connected to a customer's Cisco Catalyst C8200 on port 23 with VLANs 12 and 21 tagged there.
I can see the MAC address from the Catalyst on VLAN 12 but not VLAN 21
The tagging of the VLANs is identical in the Extreme switch and from what I can tell it is identical in the C8200
EXOS config
show fdb port 23
MAC VLAN Name( Tag) Age Flags Port / Virtual Port List
------------------------------------------------------------------------------------------------------
e4:4e:2d:4d:47:f1 VLAN12(0012) 0000 dhm 23
show port 23 vlan
Untagged
Port /Tagged VLAN Name(s)
-------- -------- ------------------------------------------------------------
23 Untagged None
Tagged VLAN12, VLAN21
Catalyst config
show running-config int gigabitEthernet 0/0/1.12
Building configuration…
Current configuration : 287 bytes
!
interface GigabitEthernet0/0/1.12
description Biz-Internet TLOC
encapsulation dot1Q 12
ip address 172.30.202.90 255.255.255.252
no ip redirects
ip mtu 1500
ip nat outside
endpoint-tracker dia-biz-inet
arp timeout 1200
service-policy output shape_GigabitEthernet0/0/1.12
end
show running-config int gigabitEthernet 0/0/1.21
Building configuration…
Current configuration : 155 bytes
!
interface GigabitEthernet0/0/1.21
encapsulation dot1q 21
ip address 172.30.203.89 255.255.255.252
no ip redirects
ip mtu 1500
ip nat outside
endpoint-tracker dia-pub-inet
arp timeout 1200
service-policy output shape_GigabitEthernet0/0/1.21
end
The configuration in the Extreme switch is identical to another switch I have in a different datacenter that is also connected to a Catalyst, however both VLANs see the MAC from the catalyst there.
