AVDECC Entity Available not sent

[Jakub_Mielczar1]

Dear Experts,
I have a Summit X440-8t AVB switch. I am running AVDECC on two devices connected to the switch. One device is AVDECC Controller, the second device is AVDECC Listener. When I run the Listener, I can see that it sends ADP Entity Available packet (Wireshark run on the Listener). I can also see on a network tap that this packet is sent on the wire. Despite that, the Controller does not see the packet, Wireshark run on the Controller does not see this packet. When I connect the Controller and Listener directly without a switch, then the packet is seen by the Controller.

What could be the reason that packet is not sent to the Controller when connected via the switch?

Kind regards,
Jakub

[Jakub_Mielczar1]

Hello,

Seems to be solved. The AVDECC messages were sent with VLAN. Sending them without 802.1Q header solved the issue.

Jakub

[Alexandr_P]

Hello, Jakub!

First of all, from your post there is no understanding switch configurations depends from connection Controller and LIstener.
Also AVB configuration and license?

Thank you!