Create Date: Jul 19 2012 2:50AM
Hi,
I've been struggling with the SNMP-configuration on my X350-switches. I haven't been working that much with Extreme switches so the configuration is sometimes a bit confusing.
I want to configure the switch to send snmp-traps to a server when some few incidents occur, for example only linkUp and linkDown.
Right now the configuration is like this:
"configure snmpv3 add target-addr v1v2cNotifyTAddr1 param v1v2cNotifyParam1 ipaddress transport-port 162 vr VR-Mgmt tag-list defaultNotify"
Since it's using the tag-list defaultNotify it sends traps for a lot of different things.
I know how to filter out unwanted traps but it seems more logical to me that I get to decide what shall be monitored to begin with.
The manual states that if I do not specify tag-list it will use defaultNotify. Furthermore it shows an example on where tag-list is specified, like this
"configure snmpv3 add target-addr A1 param P1 ipaddress 10.203.0.22 from 10.203.0.23 tag-list type1,type2".
Now, what is type1 and type2 in this configuration? How would I go about configuring so that the switch will only send traps for linkUp and linkDown?
Could someone show e an example or point me in the right direction?
Best regards,
Daniel
(from Daniel_Warhammar)
