cancel
Showing results for 
Search instead for 
Did you mean: 

Cannot backup file(primary.cfg) to solarwinds tftp server.

Cannot backup file(primary.cfg) to solarwinds tftp server.

Yuki_Nakamura
New Contributor II

Hi,

I am trying to upload the primary.cfg from the X460G2 stacking switch.

And I cannot uplaod the configuration file to the tftp server from the switch but I can uplaod the policy files to the server.

Slot-1 X460G2.6 # tftp put 157.110.132.111 vr "VR-Default" primary_bak_202012.cfg X460G2_test_primary.cfg
Uploading X460G2_test_primary.cfg to 157.110.132.111 ..........................
................................................................................
............... failed!
Error: timeout
Slot-1 X460G2.7 #

 

What I see the following messages on the Solarwinds TFTP server.
Could you please tell me what I am doing wrong?

 

TFTP connected from 157.110.66.65:55536 on 12/22/2020 11:22:10 AM,binary.GET,Transmission failed. Could not find file `C:\TFTP-Root\EXTRTEST`
TFTP connected from 157.110.66.65:57109 on 12/22/2020 11:22:10 AM,binary.PUT,File Exists,C\TFTP-Root\X460G2_test_primary.cfg
TFTP connected from 157.110.66.65:57109 on 12/22/2020 11:22:10 AM,binary.PUT,Deleting Existing File.
TFTP connected from 157.110.66.65:57109 on 12/22/2020 11:22:10 AM,binary.PUT,Started,file name:C:\TFTP-Root\X460G2_test_primary.cfg
TFTP connected from 157.110.66.65:57109 on 12/22/2020 11:22:32 AM,binary.PUT,Dropped beacuse peer didn`t respond.

 

Best Regards,

2 REPLIES 2

Yuki_Nakamura
New Contributor II

Hi,

No, I am not using the jumbo frames on the switch.

 

Best Regards,

OscarK
Valued Contributor

Any chance you are using jumbo frames on the switch and not on the tftp server ?

Otherwise make a wireshark trace and see what is going wrong.

GTM-P2G8KFN