Cannot ping google from switch.

[nola_saint]

I'm new to networking and new to extreme switches. I just setup x440g2 switch and can ping everything on my network but I cannot ping google. What am I missing.

[nola_saint]

Any ideas from anyone. Has anyone else experience this problem.

[nola_saint]

I'm thinking its the way I configured the switch. All the other switches seem to be able to ping google. So what am I missing? I have all the switches configured the same way.

[nola_saint]

I'm thinking my routing and gateway is ok. I say this because anything device attached to it like a PC or IP phone is working correctly.

DNS setting, are you referring to a DNS setting on the switch or servers for the network. I did not see and switch commands for configuring DNS I will have to go back and check.

For DNS are you saying that I will have to use the command below and enter the name of the DNS server

configure dns-client add name-server

Firewall, I will have to check and see if there is setting on the firewall for switches.

[Hunt_Liao]

I think you need check some setting in your network :
1. Routing and gateway in your network.
you setting gateway on your switch , you also need check session reply can back to you .
2. DNS setting is correct before you ping FQDN
you need setting name server,and you can get ip-address when you ask FQDN to DNS on your switch before PING FQDN.
3.checking outgoing policy can let your switch ping out .
It's mean you need make sure your company 's out going policy can let your switch's ip-address can pass through with your firewall, IPS....etc.