changing slot number in stack

[Gene_Fontanilla]

On my current working stack, i have 2 x670v and 2x440. I added another 2 x670v to the stack, I want to change the slot numbers of the current 2 x440 to a different stack number. By doing this, will the config also adapt to the change? or would i need to reconfigure it?

Setup is:

x670v <- Slot 1
x670v <- Slot 2
x670v <- Slot 5
x670v <- Slot 6
x440p <- Slot 3
x440p <- Slot 4

What i want:

x670v <- Slot 1
x670v <- Slot 2
x670v <- Slot 3
x670v <- Slot 4
x440p <- Slot 5
x440p <- Slot 6

[PARTHIBAN_CHINN]

Its Glad to know you've found the problem.
Thanks for asking right questions in forum.

[Gene_Fontanilla]

Hi Parthibam,

THANK YOU VERY MUCH!

i found out what the problem is, our x440 doesn't have advanced edge license!

thank you for the patience on this matter.

regards! and more power

[Alexandr_P]

# show stacking slot X detail
will show you more information about what slot have license mismatch.
look at this outputs and compare them

[PARTHIBAN_CHINN]

configure stacking {node-address node-address | slot slot-number} license-level[core | advanced-edge | edge]
Description
Allows you to restrict the license level at which the node operates.

Try this command and reboot the slot