ExtremeSwitching (EXOS/Switch Engine) - Page 75 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

X440-G2-48P-10GE4 Rear Shared Ports Issue

Hi All,We have a strange issue where on x440-g2 model switch above, where we use the rear ports for uplink to switches, non stacked.Specifically ports 51 and 52. We've noticed during power issues/power testing, sometimes these ports can go down and s...

EXOS on VirtualBox

Hi fam! I am an aspiring network engineer. And since I don't have an actual appliance, I downloaded VirtualBox for simulation. My first goal is to simulate EXOS FW upgrade. And so, I made my PC as the TFTP server, Installed EXOS ver 21 on virtualbox,...

EXOS to VOSS ISIS connection

Hi,Trying to find how to connect an EXOS switch to an existing Fabric core switch which has VOSS. Not clear what configuration to apply to EXOS to create SPBM 1 and enable ISIS on an interface to bring up an adjacency using standard B-VLANs 4051-4052...

Will the basic xsf script used with EXOS 22.7x work without issue on EXOS 3x.x?

I am in the process of deploying some new test bench switches X4460G2 and I had an issue with original script I had but it came from from EXOS 15 and it kept throwing script errors, the errors seemed more to do with the scripting then the actual EXOS...

Resolved! Connect a QSFP+ cable between a 5520-48W and a x770-32q

Hi,I am attempting to connect a 5520-48W to a x770-32q using a QSFP+ cable, but when it's connected, there's no link light and no sign of the link being up at either end. I believe I have enabled the right ports. On the 5520-48W, I am using one of ...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN