config ntp server on 15.1.2.12 670-48p-10g

[Randy_Middleton]

Command Ref (http://extrcdn.extremenetworks.com/wp-content/uploads/2014/02/EXOSCommandRef_15.1_Version4.pdf) says "configure ntp [server | peer] add [ | ] {key
} {option [burst | initial-burst]}"

670-48p-10g does not recognize "sh ntp" or "config ntp"

Just want to point it to a local time server.

What am I missing?

[Drew_C]

I'll take care of the "resolution" here. Glad we could help.
Just to clarify, is SNTP what you were looking for? Or did Patrick's NTP information help?

[Patrick_Voss]

You can like my comments and I am sure Drew will take care of the resolved part .

I agree breaks in general get shorter and shorter.

[Randy_Middleton]

Too many switch brands, versions, languages...
Thank you very much!
How to I mark this resolved and kudos to you?

[Patrick_Voss]

That is because they are two different protocols.

[Randy_Middleton]

That works. Not what is in the manual, but....
SH-AGG-670-48p-10g.7 # sh sntpSNTP client is enabled
SNTP time is valid
Primary server:10.90.2.162 VR-Default
Secondary server:
Broadcasts: VR-Mgmt
Query interval:64
Last valid SNTP update: From server:10.90.2.162, on Thu Oct 1 17:53:34 2015