Hi all, I am just looking at using extreme as edge switches, have been using them for core and aggregation for years. We have a large network with two central DHCP servers which we then use UDP forwarding from each user vlan. As I see it, we need ...
Wondering if there is a way to stack two commands in a single line of the EXOS CLI? For example in windows you can issue a "ipconfig /release & ipconfig /renew" in one line and it will execute both commands back to back. I need to cycle a port than...
We recently had a network event where a card in our core switch would not lock OSPF neighbors. I ended up rebooting this card and was able to restore services. However, I am confused why the network didn't alter the default route in the rest of our r...
Hello, everyone!I have 460-G2 switch with 16.2 EXOS.The problem is I can't configure syslog, using this article:https://extremeportal.force.com/ExtrArticleDetail?an=000074214Everything works fine in 15x EXOS, but not in 16.x. In 15x using the setting...
Hi community, we have BlackDiamond X8 Firmware Release 16.1.3.6 how best to configure rate limiting with max 5Gbps (10Gbps available) at a dedicated VLAN for Backup-Traffic ? Would you recommend to configure "meter" plus "acl" ingress to VLAN ? A...
