Configuring the ip unnumbered interface - Page 2 - Extreme Networks - 33139

Configuring the ip unnumbered interface

How do these settings on ExtremeXOS version 15.4.1.3 X460-48t
http://www.cisco.com/c/en/us/support/docs/ip/hot-standby-router-protocol-hsrp/13786-20.html#diagone

7 REPLIES 7

Hi Chubak,
Please let us know , what you are trying to achieve on your set up.

Thanks,
Suresh.B

Hi, Igor!

Also you can use ESRP.
http://documentation.extremenetworks.com/exos/EXOS_All/ESRP/c_overview.shtml

Thank you!

Hi Chubak,

Just to clarify, are you looking to connect two switches together and have them talk or are you looking for the HSRP setup. HSRP is not a standard and can only be configured on Cisco. You may be looking for VRRP. If this is true here are some articles that should be able to get you started:

https://gtacknowledge.extremenetworks.com/articles/Q_A/Which-command-is-used-to-add-ports-to-a-vlan
https://gtacknowledge.extremenetworks.com/articles/How_To/Configure-IP-address-on-a-VLAN
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-enable-inter-VLAN-routing-in-EXOS
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-a-basic-VRRP-configuration

Hope this helps!

GTM-P2G8KFN