ExtremeSwitching (EXOS/Switch Engine) - Page 215 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Extreme Summit x870-32c - 100Gb partition to 25Gb - port status always Active

HelloI don't see any correspondence btw extreme ports and link interfaces on my server.I have this design with 1 input port 100Gb , I have partition it : configure ports 1 partition 4x25Gconfigure port 1 auto off speed 25000 duplex fullconfigure port...

palo alto crashes network

I am using a PA220 and x440 switches together on a simple network. for some reason out of the blue the firewall crashes when connected to the switch. I have tested the PA where I pulled it out of the network and connected it to a Cisco 2960 and all i...

Resolved! configure port to allow multiple vlans but untag one specific vlan traffic. also set up that specific vlan as default vlan of that port?

Hello, I need some help to make some changes to a X465 switch configured by someone else. I need to configure a port to allow multiple vlans but untag one specific vlan traffic. Also set up that specific vlan as default vlan of that port? This is b...

Resolved! X460-G2 nat capability

Hi All, I would like to ask if this device is capable for NAT function? If not, is there anyway I can have it working on the device without using an extra router/firewall?

MSDP configuration

Hi, I have a problem with create/configure msdp. i cant create msdp peer - when i put command : create msdp peer 10.100.3.242 vr TV_APMEDIA i get MSDP not configured on vr TV_APMEDIA when i put: configure msdp peer 10.100.3.242 i get : %% Invalid inp...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN