core switch configure stp
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎02-26-2017 05:25 PM
hello
i have a core swich extreme summit x450 and I would like to know how to configure the spanning tree
I believe that the priority must be at least What is the correct configuration?
thank you for your support
i have a core swich extreme summit x450 and I would like to know how to configure the spanning tree
I believe that the priority must be at least What is the correct configuration?
thank you for your support
3 REPLIES 3
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎02-26-2017 11:44 PM
Hi Greg,
The below link gives you the basic idea of configuring RSTP in summit/BlackDiamond switches,
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-RSTP-in-EXOS
The below link is for the user guide to EXOS and sample configuration is available for your reference.
https://extrcdn.extremenetworks.com/wp-content/uploads/2014/01/EXOS_Concepts_Guide_15_4.pdf
As far as the priority goes, lower the numerical value of the priority, higher the precedence.
The below link gives you the basic idea of configuring RSTP in summit/BlackDiamond switches,
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-RSTP-in-EXOS
The below link is for the user guide to EXOS and sample configuration is available for your reference.
https://extrcdn.extremenetworks.com/wp-content/uploads/2014/01/EXOS_Concepts_Guide_15_4.pdf
As far as the priority goes, lower the numerical value of the priority, higher the precedence.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎02-26-2017 09:31 PM
hi dave
my version is 15.5.5.2
The article does not talk about core switch and priority
Because it seems to me that the configuration of spanning tree is different on a switch core network
my version is 15.5.5.2
The article does not talk about core switch and priority
Because it seems to me that the configuration of spanning tree is different on a switch core network
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎02-26-2017 09:08 PM
If you are running EXOS 21.x or later, have you seen https://github.com/extremenetworks/EXOS_Apps/tree/master/EZ_SpanningTree