ExtremeSwitching (EXOS/Switch Engine) - Page 287 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Is it possible to delete a netlogin / multiauth session an a port via cli?

Hello, we use MAC and 802.1X authentication with EXOS and EOS switches and sometimes I need to delete a netlogin / multiauth session on a switchport via cli example: the "show netlogin session ports" or "show multiauth session ports" showes me an en...

Inter-VLAN traffic not working despite forwarding being enabled

I have a network with (4) VLANs that need to not see each others broadcast traffic, but still be able to exchange packets for network control purposes.I've got IPforwarding enabled on all (4) VLANs, and all ports are set as untagged, but am unable to...

Resolved! show port configuration no-refresh

Hi, ran: show port configuration no-refresh Port Configuration Port Virtual Port Link Auto Speed Duplex Flow Load Media router State State Neg Cfg Actual Cfg Actual Cntrl Master Pri Red =======================================...

Resolved! SSH Xmod

Hi, I cant install teh SSH xmod 15.3 onto XOS 15.2 “Installing to Switch.Error: Failed to install image - version mismatch between XOS and xmod” Please can you help? Thanks Paul

Suspected PoE problem X450 and X460

I have a few Sony PoE cameras that randomly go offline about every 1 or 2 weeks. I suspect these cameras are less tolerant of fluctuation with PoE because other cameras on same switch operate fine. Is there any extra logging I could enable to help me...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN