Create ACL and apply to a port

[jdr1900]

Can I create an ACL and apply to a port to restrict traffic? Switch type is Summit 200-48 running firmware ver 7.1e.2. (Summit Stack ver 15.3.5.2)

[jdr1900]

Thanks for the links and pdf.

[Drew_C]

Awesome use of the attachments feature, @M.Nees!

[M_Nees · Accepted solution]

Here is also on old manual with some ACL examples
- Starting P.101 -Exampes P.110

[M_Nees]

I upload the Datasheet of this switch.

Layer 2-4 ACLs are possible - but maybe only with "Advanced Edge software".

BR,
Matthias