cancel
Showing results for 
Search instead for 
Did you mean: 

Data bus error

Data bus error

Alexandr_P
Valued Contributor
Hello, all!

Help please - is below issue HW (RMA) or SW?

System Type: X460G2-24x-10G4
X460 had EXOS 16.1.3.6
Appear unexpected reboot:
09/18/2018 22:31:26.73 Booting after System Failure.
09/18/2018 22:30:32.41 Data bus error, epc == ffffffff801324d0, ra == ffffffff80130e70, DPA=0x0

09/07/2018 10:51:48.57 hub 1-0:1.0: unable to enumerate USB device on port 1
09/07/2018 08:36:29.05 Booting after System Failure.
09/07/2018 08:35:20.77 Data bus error, epc == ffffffff801324d0, ra == ffffffff80130e70, DPA=0x0

->show debug system-dump
===============================================
Switch system dump information
===============================================
core_dump_info storage: 8/5120 used [empty]
failure: kernel oops
reason: Oops
time: Tue Sep 18 22:30:25 2018
...
log: ... Data bus error, epc == ffffffff801324d0, ra == ffffffff80130e70, DPA=0x0
log: <6>Dumping ftrace buffer:
log: <6> (ftrace buffer empty)

After upgrade to EXOS 21.1.5.2 switch rebooted again (but without "Data bus error" logs)
10/09/2018 09:42:54.72 Booting after System Failure.
10/09/2018 05:12:22.18 Booting after System Failure.

Thank you!
1 REPLY 1

Necheporenko__N
Extreme Employee
Hello Alexandr,

Have you checked hardware conditions with CLI command "run diag extended"?

Best Regards,
Nikolay
GTM-P2G8KFN