Hi all,
I had some trouble to call dhcp server in X620-16x-FB that act as Core Switch. This site before, used HP3com for core switch. After convert the config into Extreme format, i failed to call dhcp server (dedicated one) for other vlan but its work for native vlan 1 that used for routing (static) between core and router.
------------------------------------------------------------------------------------------------------------------------------------
SANGFOR : 10.112.108.254 (use for static route to core, physical interface g3)
10.112.109.0, 10.112.110.0, 10.1128.111.0 ,(through g3 nexthop 10.112.108.253)
||
||
||
X620-16X : 10.112108.253 (use for static route to core, interface vlan 1)
----------------------------------------------------------------------------------------------------------------------------------
last config on HP3com:
[CoreSwitch]dis current-configuration
#
sysname CoreSwitch
dhcp-server 1 ip 10.112.108.26
#
igmp-snooping enable
#
fabric member-auto-update software enable
#
radius scheme system
#
domain system
vlan 1
igmp-snooping enable
#
vlan 109 to 111
#
interface Vlan-interface1
ip address 10.112.108.253 255.255.255.0
#
interface Vlan-interface109
ip address 10.112.109.253 255.255.255.0
dhcp-server 1
#
interface Vlan-interface110
ip address 10.112.110.253 255.255.255.0
dhcp-server 1
#
interface Vlan-interface111
ip address 10.112.111.253 255.255.255.0
dhcp-server 1
-------------------------------------------------------------------------------------------------------------------------------
