Error: MED Capabilities LV is not enabled

[Rory_Schmitz]

Hello,

New 5520’s in a stack running 31.1.1.3 patch1-1

I’m trying to add all of the lldp commands I typically run on our previous gen switches, but getting stuck on the error mentioned in the title.  Here are the commands I am copying and pasting:

configure lldp port 1:1-48,2:1-48,3:1-48 advertise port-description power-via-mdi

configure lldp port 1:1-48,2:1-48,3:1-48 advertise system-name

configure lldp port 1:1-48,2:1-48,3:1-48 advertise system-capabilities

configure lldp port 1:1-48,2:1-48,3:1-48 advertise management-address

configure lldp port 1:1-48,2:1-48,3:1-48 advertise vendor-specific dot3 mac-phy

configure lldp port 1:1-48,2:1-48,3:1-48 advertise vendor-specific med power-via-mdi
Error: MED Capabilities TLV is not enabled.

I’ve even done the following:

enable lldp ports 1:1-48,2:1-48,3:1-48

Any idea how I can enable MED Capabilities TLV?

EDIT: Cleaned up command format
 

[Miguel-Angel_RO]

[Rory_Schmitz]

That’s a great link, indeed!  Thank you very much.  The one command I was missing initially was the following, which resolved my issue in this new code version.  Previously, I had never had to add that on any of our other switches.

configure lldp port all advertise vendor-specific med capabilities

I appreciate the quick help!

[Miguel-Angel_RO]

And this well done page: https://infra.engineer/miscellaneous/25-configure-lldp-on-extreme-exos-switching

Mig

[Miguel-Angel_RO]

Rory,

I’m able to get this on an X435:

Have a look at the following topic replacing “...lldp port advertise...” by “...lldp port <port number> advertise...”:

Mig