Must I have an LDP route to get the VPLS up, if I have RSVP labels for the 2 LSR's loopback ip addresses? Ingress/Egress LSR's Ingress:BookerXOS to Egress:DuckwaterXOS Ingress:DuckwaterXOS to Egress:BookerXOS System Type: X460G2-24t-G4 Current...
Hello togehter, i have an extreme switch an would like to use snmp. my snmp config looks like this: problem is: my snmp test tool says: Error #2003 What can i do now?
Have an issue on some X670G2-48x-4q switches with Tyco Electronics SFP+ copper cables. On two switches now the port goes down with a "local fault" then comes back up within seconds. Then goes down again at various intervals from a few minutes to 30...
Hello, everybody! I can't make port to be disabled after it receives BPDU. I've connected the port to C2960 and it is still forwarding regardless it's access or trunk port on cisco. Please, take a look at my confs: PORT: configure stpd V12 ports ...
As we work on creating new test case using tempest for extreme specific neutron command(like device-create,device-list and etc),We would like to know the rest call using curl to get the list of devices and others too in open stack. Kindly suggest us...
