cancel
Showing results for 
Search instead for 
Did you mean: 

EXOS IP-SECURITY

EXOS IP-SECURITY

Jarek
New Contributor II
Hello,

a question to Extreme guys, any chance to fix the problem described bellow ?

By default ARP learning is enabled with:
enable ip-security arp learning learn-from-arp vlan lan1 ports 1

If I disable learn-from-arp and enable only learn-from-dhcp:
disable ip-security arp learning learn-from-arp vlan lan1 ports 1
enable ip-security arp learning learn-from-dhcp vlan lan1 ports 1

The config in runing switch shows that:
disable ip-security arp learning learn-from-arp vlan lan1 ports 1
enable ip-security arp learning learn-from-dhcp vlan lan1 ports 1

but if I save the config and reboot the switch I have both enabled:
enable ip-security arp learning learn-from-arp vlan lan1 ports 1
enable ip-security arp learning learn-from-dhcp vlan lan1 ports 1

I've checked the xml config and I see inside:
0dhcp1lan11

It seems that the xml parser ignores "0".

Regards
--
Jarek

2 REPLIES 2

Jarek
New Contributor II
I can't do it via e-support portal, but I will write to our partner.

--
Jarek

PARTHIBAN_CHINN
Contributor
Its looks to me a bug.
could you raise it to TAC
GTM-P2G8KFN