HiIs it possible to build stack with SFP+ single-mode and SFP+ multi-mode together with n°4 5420F-24T-4XE? n°2 switch in Rack 1 and n°2 switch in remote Rack 2 connected by SFP+ single-mode.And in stacking mode, I don't find totale perfomance about n...
Hello.I have a question. I form the Stack by CLI, for example 3 Switch, I connect the Master of the Stack to the internet and I upload this MASTER to the Extreme Cloud. only with this master SW connected to the internet does the other two Switches fo...
HiI’m a little rusty on tagging so just after some thoughts from esteemed members.Setting up a firewall with sub-interfaces so only one connection from switch to FW interface. Default route is configured on the switch.However the setup I have is no...
Hi,As the topic,From which version of EXOS it is possible to check bits send/receved via snmp (Stack Ports)?Thank you in advance,
TFTP finishes and says done. When I issue the use config command I get ^ at first character of config file. Doesn't matter what the file name is. Config or any backup config file. What am I missing here? This should be simple.....
