EXOS MLAG Configuration

[Waqas_Naeem]

I have two stacks of 870s as a Core and X690 as an edge switch. To create MLAG, I found peer & ISC configuration details from below:

https://extremeportal.force.com/ExtrArticleDetail?an=000079895

But I couldn't found any article covering both core and edge configuration for EXOS MLAG just like in below case where core is EXOS and edge is EOS:
https://extremeportal.force.com/ExtrArticleDetail?an=000087628

Please advise

[Ronald_Dvorak]

For the access switch the 2x core switches look like one switch (that's the main function of MLAG) - so you just configure a normal LAG on the access switch

https://extremeportal.force.com/ExtrArticleDetail?an=000074233

[Waqas_Naeem]

Thanks Ronald for clarification and assistance.