Exos snmpv3 configuration for fortinac

[Ahmed_101]

Hi all,
a customer have exos switch and fortinac, we are trying to do the snmp configs in exos so it can communicate with fortinac but we alwase get error says that the snmp configs is wrong in fortinac 
we doubled check the snmp credentials more than ones. are we missing something ? 
i followed this article : https://extreme-networks.my.site.com/ExtrArticleDetail?an=000083334
Thank you.

[mark96 · Accepted solution]

Hello,

Make sure the SNMP version configured on the EXOS switch matches exactly what FortiNAC expects (v1, v2c, or v3).FortiNAC often prefers SNMPv2c or SNMPv3 — check which version is configured on both ends.Verify that the community string (for SNMP v1/v2c) is set correctly on EXOS and FortiNAC.Community string is case-sensitive and must match exactly.For SNMPv3, check user name, authentication and privacy protocols and passwords.


Best Regards