Extreme Networks

Ahmed_101

Hi all, I'm working on Fabric Attached edge ERS switch and this switch is connected to VOSS running fabric to integrate the ERS switch with extreme control.My goal is to configure mac authentication 802.1x and authenticate wireless clients in AP whic...

Ahmed_101

Hi all.A customer have many 3rd party switches like hp tp link cisco etc...we want to configure mac authentication in extreme control for these switches. i got confused a little i know that policy roles is extreme priority so it just works for extrem...

Ahmed_101 · 08-11-2025

Hi all, Im trying to configure dynamic vlan assignment using extreme control for extreme 200 switch. what should nac return to the switch? i tried sending RFC 3580 to the switch but the client does not move to the required vlan. any help ? Thanks.

Ahmed_101 · 08-06-2025

Hi all, Im trying to configure wireless client authentication in wing controller with microsoft NPS.I searched alot but i dont seem to find any document explaining that, so i just went on with my previous knowledge and configured the ssid authenticat...

Ahmed_101 · 07-23-2025

Hi all, I have an issue where i have a rujie switches and cisco switches for a customer.So i configured mac authentication in cisco switches and it works fine but when i configured it on rujie switches i encountered issue where the rujie switch is se...

Ahmed_101

Hi all, Now the packets are sent to nac and the client is authenticated successfully in extreme control side, but there is a problem where the clients stay in intruder state : -------------------------- Unauthorized Clients --------------------------...

Ahmed_101

Hi Ryan Thank you. Just another question i want to configure the nac in monitoring mode so i will just enable mac authentication on the switches and make a rule in nac to accept all the requests so our purpose is to just to see the mac addresses of t...

Ahmed_101 · 08-13-2025

Thanks, i solved the problem and its working now but i have another question.can we assign a port to more than one vlan? like i have a switch and there is APs connected to it i want to send the wifi management vlan as untagged and clients vlans as ta...

Ahmed_101 · 08-09-2025

Thank you.

Ahmed_101 · 08-08-2025

Hi now this error is solved but when the clients is authenticated in the NPS but in the client side the authentication proccess can not be done.we get error "Failed to connect, try again".

Extreme Networks

User Statistics

User Activity

ERS switch integration with Extreme control.

Extreme control integration with 3rd party switches

Extreme 200 series dynamic vlan assignment with extreme control

Extreme Wing Controller integration with NPS

Integrating rujie with extreme control

Re: ERS switch integration with Extreme control.

Re: Extreme control integration with 3rd party switches

Re: Extreme 200 series dynamic vlan assignment with extreme control

Re: Extreme Wing Controller integration with NPS

Re: Extreme Wing Controller integration with NPS