EXOS traceroute displaying !O flag on each response

[Luis_Rivera]

When executing a trace route to a LAN address from a switch Core Black Diamonf 8010, it sends me the following output
1 10.7.136.146 4 ms !O 7 ms !O 1 ms !O
2 10.7.136.146 5 ms !O 1 ms !O 5 ms !O
3 *
3 10.7.136.146 3 ms !O *
4 10.7.136.146 4 ms !O * 9 ms !O
5 *My question is what does the !O mean, It seams like I am having a route flapping, rigth?

Thanks in advanced for your answr

[Luis_Rivera]

Yes It does, the flags are shown for all the 30 hops until finished

[Patrick_Voss]

Do the flags show up after the command is finished running?

[Luis_Rivera]

ExtremeXOS version 15.7.2.9 v1572b9 by release-manager

[Patrick_Voss]

Hi Luis,

What version of code are you running? The command reference guide should have something about this flag.