Hi ,
When i use 100 mbit sfp with xtreme 460 i have to set it to 100 mbit with the following command.
configure ports 21 medium fiber auto off speed 100 duplex full
configure ports 21 medium fiber auto on speed 100 duplex full
when i type this port runs in 100 mbit
but after a while port forgets the sfp...
i have to reenter the same configuration to bring the sfp back up.
and i have to do this every time i reboot the device.
this does not happen on gigabit sfp's.
no matter which brand 100 mbit sfp i used transition networks , cisco , the same thing happened.
no matter which brand i used with gigabit nothing happens. it works flawlessly.
the issue is about 100 mbit sfp's only.
could someone give a reasonable answer to me.
