hi guys im new to extreme switches and im having a hard time configuring these switches
heres the scenario:
we have extreme x670v switches and using 1/g sfp tranceiver
configure vlan "public" add ports 17-24 untagged
enable ports 17-24
now to check if the ports and vlan are working:
laptop 1 connected to port 17 with same subnet
laptop 2 connected to port 24 with same subnet
both ends unreacheable
and when i enter this command
show vlan, it says no active ports
am i missing something here?
show vlan "public" VLAN Interface with name public created by user
Admin State: Enabled Tagging: 802.1Q Tag 99
Description: None
Virtual router: VR-Default
IPv4 Forwarding: Disabled
IPv6 Forwarding: Disabled
IPv6: None
STPD: None
Protocol: Match all unfiltered protocols
Loopback: Disabled
NetLogin: Disabled
QosProfile: None configured
Egress Rate Limit Designated Port: None configured
Flood Rate Limit QosProfile: None configured
Ports: 8. (Number of active ports=0)
Untag: 17, 18, 19, 20, 21, 22, 23,
24
Flags: (*) Active, (!) Disabled, (g) Load Sharing port
(b) Port blocked on the vlan, (m) Mac-Based port
(a) Egress traffic allowed for NetLogin
(u) Egress traffic unallowed for NetLogin
(t) Translate VLAN tag for Private-VLAN
(s) Private-VLAN System Port, (L) Loopback port
(x) VMAN Tag Translated port
(G) Multi-switch LAG Group port
