cancel
Showing results for 
Search instead for 
Did you mean: 

Extreme x670 . The port indication is on when the down command is forced, and when the physical cable is disconnected

Extreme x670 . The port indication is on when the down command is forced, and when the physical cable is disconnected

Andrei1989
New Contributor
I am using a project stack of 4 extreme switches (2-x670 vim 4-40G4X module, 2-x460 v80 module). 
Updated switch version to 16.2.5.4 patch1-20

The port indication is on when the down command is forced, and when the physical cable is disconnected

This occurs on all ports on the switch and on stack ports.

 

9032dc109d5944b5a7a7461a7b837a8c_f0bf06a6-9019-4b06-b76a-93805dac8d1e.png

 

cable removed

1 ACCEPTED SOLUTION

davidj_cogliane
Contributor

Lights being on if there is no link sounds like a bug and I recommend opening a TAC case to report and try to resolve that.

If you look at the port in the CLI does it show disabled and ready?

The thing that really caught my attention though is the mixed stack. Are you aware that you are limited by the table sizes of the least powerful switch?

The stacking tool can show you what you are working with in your case.

https://stackingtool.extremenetworks.com/StackingTool/

 

View solution in original post

8 REPLIES 8

Andrei1989
New Contributor

Hi, David

Ports are disabled, but the LEDs on the switch are blinking. Problem with indication on stack ports and ethernet ports from 1 to 25, after 25 ethernet port and optical port indication works correctly.

The table sizes are not oversized

2526b33109f14403a2205bed3644cafd_249d87c2-57c2-4865-873a-d552a7ce66f4.png

 

How do I open a support ticket?

davidj_cogliane
Contributor

Lights being on if there is no link sounds like a bug and I recommend opening a TAC case to report and try to resolve that.

If you look at the port in the CLI does it show disabled and ready?

The thing that really caught my attention though is the mixed stack. Are you aware that you are limited by the table sizes of the least powerful switch?

The stacking tool can show you what you are working with in your case.

https://stackingtool.extremenetworks.com/StackingTool/

 

Andrei1989
New Contributor

Hi, mig. 

Why on the ports the indication is on when it is off?

Miguel-Angel_RO
Valued Contributor II

Andrei,

What’s the question?

Mig

GTM-P2G8KFN