Facing Challange on Configuring LACP ???

[Boopaa]

Am facing difficulties while configuring LACP on Summit X450 :-
Command which I used in SW :

enable sharing 1 grouping 1-4 algorithm address-based L2 lacp

My question is , Is that mandatory to configure LACP on my Dell Server ? (If yes, How ? )

After entering the lacp commands, i am getting request timeout on my continuous ping( to server).....
Kindly help me out in this as early as possible !!!!!!

[Boopaa]

Actually My X450 is connected to a Storage server ( 4 interface is Active & 4 interface are Passive - all 4 interface have Unique IP address)
Then my storage device is connected to the Server & its works on windows server 2012)
Now, If i try to configure LACP on my switch, I will loose my connectivity & I need your support to eliminate this !!!!!!

[StephenW]

You can check the link below for setting up NIC teaming.

http://www.netdavidic.com/2013/09/how-to-create-nic-teaming-on-windows.html

[Boopaa]

Its really nice & helps me..!!!

[BradP]

Yes, you must also build a LAG on your Dell Server as well. How, depends on your OS and/or the NIC drivers on how to do that.

[Boopaa]

Actually My X450 is connected to a Storage server ( 4 interface is Active & 4 interface are Passive - all 4 interface have Unique IP address)
Then my storage device is connected to the Server & its works on windows server 2012)
Now, If i try to configure LACP on my switch, I will loose my connectivity & I need your support to eliminate this !!!!!!