Get info by SNMP about "ports transceiver information"

[Alexey_Boykov]

Hello, I would like to know if there's OID that can help to get information about tranciever on Summit ports.

F.e like by command "show ports tranciever information":
Port Temp TxPower RxPower TxBiasCurrent Voltage-Aux1/ Voltage-Aux2 (Celsius) (dBm) (dBm) (mA) Vcc (Volts) (Volts)
================================================================================
1 44.33 -2.50 -3.82 26.65 3.29 N/A

[EtherMAN]

Has been asked for by many as an added feature. So far no go you have to log in via cli and run command for the levels... We can continue to ask so this feature request may get traction

[Alexey_Boykov]

David, i'm just trying to monitor optics signal on Summit ports using Nagios, snmp.

[davidj_cogliane]

Alex, What is the problem you are trying to track? Or the reason you need the transceiver information? Just wondering if there is another way to get what you need.

[Alexey_Boykov]

Thanks for answer!

[Necheporenko__N]

Hello Alexey,

This feature is unsupported currently.