This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

gPTP enabled but disabled at the port level for summit x440-24t switch with exos v15.2

gPTP enabled but disabled at the port level for summit x440-24t switch with exos v15.2

Sangeeta_Ghanga
New Contributor

‎09-19-2018 08:24 PM

We have a Summit x440-24t switch with AVB support which we use for demos where multiple computers are connected and synchronized using gPTP. We had this capability working on the switch for the past 5-6 years. I am trying to test an updated version of the application on the computers and running into gPTP being disabled on the switch. How do I enable gPTP on each of the ports given that AVB is already enabled?

Here is the console output

* (Beta) X440-24t.32 #
* (Beta) X440-24t.32 # show version
Switch : 800471-00-04 1212G-01300 Rev 4.0 BootROM: 2.0.1.6 IMG: 15.2.0.2 6
PSU-1 : Internal Power Supply
PSU-2 :

Image : ExtremeXOS version 15.2.0.26 v1520b26 by release-manager
on Tue Jul 3 14:48:02 EDT 2012
BootROM : 2.0.1.6
Diagnostics : 5.6
* (Beta) X440-24t.33 # show switch
SysName: X440-24t
SysLocation:
SysContact: support@extremenetworks.com, +1 888 257 3000
System MAC: 00:04:96:6D:58:5A
System Type: X440-24t

SysHealth check: Enabled (Normal)
Recovery Mode: All
System Watchdog: Enabled

Current Time: Mon Sep 17 16:23:43 2018
Timezone: [Auto DST Disabled] GMT Offset: -420 minutes, name is not set.
Boot Time: Mon Sep 17 10:08:03 2018
Boot Count: 116
Next Reboot: None scheduled
System UpTime: 6 hours 15 minutes 40 seconds

Current State: OPERATIONAL
Image Selected: secondary
Image Booted: secondary
Primary ver: 15.1.0.20
Secondary ver: 15.2.0.26

Config Selected: primary.cfg
Config Booted: primary.cfg

primary.cfg Created by ExtremeXOS version 15.2.0.26
227919 bytes saved on Mon Sep 17 15:12:35 2018
* (Beta) X440-24t.34 # show avb
gPTP status : Enabled
gPTP enabled ports : *1d 2d 3d 4d 5d
6d 7d 8d *9d 10d
*11d 12d 13d 14d 15d
16d 17d 18d 19d 20d
21d 22d 23d 24d

MSRP status : Enabled
MSRP enabled ports : *1 2 3 4 5
6 7 8 *9 10
*11 12 13 14 15
16 17 18 19 20
21 22 23 24

MVRP status : Enabled
MVRP enabled ports : *1 2 3 4 5
6 7 8 *9 10
*11 12 13 14 15
16 17 18 19 20
21 22 23 24

Flags: (*) Active, (!) Administratively disabled,
(d) Disabled gPTP port role, (m) Master gPTP port role,
(p) Passive gPTP port role, (s) Slave gPTP port role
* (Beta) X440-24t.35 # show network-clock gptp ports 11
Physical port number : 11
gPTP port status : Enabled
Clock Identity : 00:04:96:ff:fe:6d:58:5a
gPTP Port Number : 11
IEEE 802.1AS Capable : No
Port Role : 3 (Disabled)
Announce Initial Interval : 0 (1.000 secs)
Announce Current Interval : 0 (1.000 secs)
Announce Receipt Timeout : 3
Sync Initial Interval : -3 (0.125 secs)
Sync Current Interval : -3 (0.125 secs)
Sync Receipt Timeout : 3
Sync Receipt Timeout Interval : 0 ns
Measuring Propagation Delay : No
Propagation Delay : 0 ns
Propagation Delay Threshold : 4294967295 ns
Propagation Delay Asymmetry : 0
Peer Delay Initial Interval : 0 (1.000 secs)
Peer Delay Current Interval : 0 (1.000 secs)
Peer Delay Allowed Lost Responses : 3
Neighbor Rate Ratio : 1.000000
PTP Version : 2

* (Beta) X440-24t.36 # show network-clock msrp
^
%% Invalid input detected at '^' marker.
* (Beta) X440-24t.37 # show msrp
MSRP enabled :Enabled
MSRP max frame size :1522
MSRP max fan-in ports :No limit
Total MSRP streams :0
Total MSRP reservations :0
MSRP enabled ports :
Port PVID VLAN Name
---- ---- ---------
*1 2 -
2 2 -
3 2 -
4 2 -
5 2 -
6 2 -
7 2 -
8 2 -
*9 2 -
10 2 -
*11 2 -
12 2 -
13 2 -
14 2 -
15 2 -
16 2 -
17 2 -
18 2 -
19 2 -
20 2 -
21 2 -
22 2 -
23 2 -
24 2 -

Flags: (*) Active, (!) Administratively disabled
* (Beta) X440-24t.38 #

0 Kudos
3 REPLIES 3

Sangeeta_Ghanga
New Contributor

‎09-26-2018 09:38 PM

Hi Drew, I updated the switch firmware to 16.2.5.4 but am still running into the same issue. See log below. All setup instructions I have seen just mention 2-3 commands to get it started, I tried setting up the clock and peer-delay but it does not seem to help. Note, I bought the AVB feature pack license and enabled the license on the device

* X440-24t.26 # show license
Enabled License Level:
Edge
Enabled Feature Packs:
AVB

Log

X440-24t.4 # show avb
gPTP status : Enabled
gPTP enabled ports : 1d 2d 3d 4d 5d
6d 7d 8d *9d 10d
*11d 12d *13d 14d 15d
16d 17d 18d 19d 20d
21d 22d 23d 24d

MSRP status : Enabled
MSRP enabled ports : 1 2 3 4 5
6 7 8 *9 10
*11 12 *13 14 15
16 17 18 19 20
21 22 23 24

MVRP status : Enabled
MVRP enabled ports : 1 2 3 4 5
6 7 8 *9 10
*11 12 *13 14 15
16 17 18 19 20
21 22 23 24

Flags: (*) Active, (!) Administratively disabled,
(a) SR Class A allowed, (b) SR Class B allowed,
(d) Disabled gPTP port role, (g) Load sharing port,
(m) Master gPTP port role, (p) Passive gPTP port role,
(s) Slave gPTP port role

X440-24t.5 # show version
Switch : 800471-00-04 1212G-01300 Rev 4.0 BootROM: 2.0.1.6 IMG: 16.2.5.4
PSU-1 : Internal Power Supply
PSU-2 :

Image : ExtremeXOS version 16.2.5.4 by release-manager
on Fri Jun 29 08:51:42 EDT 2018
BootROM : 2.0.1.6
Diagnostics : 6.4
X440-24t.6 # show msrp streams
Stream Id Destination Port Dec Vid Cls/Rn BW
----------------------- ----------------- ---- ---- ---- ------ ---------

Total Streams: 0

-------------------------------------------------------------------------------
(!) : Talker pruned or forbidden, BW : Bandwidth,
Cls : Traffic Class, Dec : Prop. Declaration Types,
Rn : Rank

MSRP Declaration Types:
Adv : Talker Advertise, AskFail : Listener Asking Failed,
Fail : Talker Fail, RdyFail : Listener Ready Failed,
Ready : Listener Ready

X440-24t.7 # enable avb ports all
* X440-24t.8 # show avb
gPTP status : Enabled
gPTP enabled ports : 1d 2d 3d 4d 5d
6d 7d 8d *9d 10d
*11d 12d *13d 14d 15d
16d 17d 18d 19d 20d
21d 22d 23d 24d

MSRP status : Enabled
MSRP enabled ports : 1 2 3 4 5
6 7 8 *9 10
*11 12 *13 14 15
16 17 18 19 20
21 22 23 24

MVRP status : Enabled
MVRP enabled ports : 1 2 3 4 5
6 7 8 *9 10
*11 12 *13 14 15
16 17 18 19 20
21 22 23 24

Flags: (*) Active, (!) Administratively disabled,
(a) SR Class A allowed, (b) SR Class B allowed,
(d) Disabled gPTP port role, (g) Load sharing port,
(m) Master gPTP port role, (p) Passive gPTP port role,
(s) Slave gPTP port role

* X440-24t.9 # show network-clock gptp ports 11
Physical port number : 11
gPTP port status : Enabled
Clock Identity : 00:04:96:ff:fe:6d:58:5a
gPTP Port Number : 11
IEEE 802.1AS Capable : No
IEEE 802.1AS Capable Age : 0d:0h:0m:0s
Port Role : 3 (Disabled)
Announce Initial Interval : 0 (1.000 secs)
Announce Current Interval : 0 (1.000 secs)
Announce Receipt Timeout : 3
Sync Initial Interval : -3 (0.125 secs)
Sync Current Interval : -3 (0.125 secs)
Sync Receipt Timeout : 3
Sync Receipt Timeout Interval : N/A
Measuring Propagation Delay : No
Propagation Delay : 0 ns
Propagation Delay Threshold : 4294967295 ns
Propagation Delay Asymmetry : 0
Peer Delay Initial Interval : 0 (1.000 secs)
Peer Delay Current Interval : 0 (1.000 secs)
Peer Delay Allowed Lost Responses : 3
Neighbor Rate Ratio : 1.000000
PTP Version : 2

* X440-24t.10 # configure network-clock gptp
%% Incomplete command
* X440-24t.11 # configure network-clock gptp ports 11
%% Incomplete command
* X440-24t.12 # configure network-clock gptp default-set
%% Incomplete command
* X440-24t.13 # configure network-clock gptp default-set priority1 248
* X440-24t.14 # configure network-clock gptp default-set priority2 100
* X440-24t.15 # show avb
gPTP status : Enabled
gPTP enabled ports : *1d 2d *3d 4d *5d
6d 7d 8d 9d 10d
11d 12d 13d 14d 15d
16d 17d 18d 19d 20d
21d 22d 23d 24d

MSRP status : Enabled
MSRP enabled ports : *1 2 *3 4 *5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24

MVRP status : Enabled
MVRP enabled ports : *1 2 *3 4 *5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24

Flags: (*) Active, (!) Administratively disabled,
(a) SR Class A allowed, (b) SR Class B allowed,
(d) Disabled gPTP port role, (g) Load sharing port,
(m) Master gPTP port role, (p) Passive gPTP port role,
(s) Slave gPTP port role

* X440-24t.16 # show network-clock gptp
gPTP status : Enabled
BMCA : On
Static slave port : None (used when BMCA Off)
gPTP enabled ports : *1d 2d *3d 4d *5d
6d 7d 8d 9d 10d
11d 12d 13d 14d 15d
16d 17d 18d 19d 20d
21d 22d 23d 24d

Flags: (*) Active, (!) Administratively disabled,
(d) Disabled gPTP port role, (m) Master gPTP port role,
(p) Passive gPTP port role, (s) Slave gPTP port role
* X440-24t.17 # enable network-clock gptp
* X440-24t.18 # show avb
gPTP status : Enabled
gPTP enabled ports : *1d 2d *3d 4d *5d
6d 7d 8d 9d 10d
11d 12d 13d 14d 15d
16d 17d 18d 19d 20d
21d 22d 23d 24d

MSRP status : Enabled
MSRP enabled ports : *1 2 *3 4 *5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24

MVRP status : Enabled
MVRP enabled ports : *1 2 *3 4 *5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24

Flags: (*) Active, (!) Administratively disabled,
(a) SR Class A allowed, (b) SR Class B allowed,
(d) Disabled gPTP port role, (g) Load sharing port,
(m) Master gPTP port role, (p) Passive gPTP port role,
(s) Slave gPTP port role

* X440-24t.19 # enable network-clock gptp ports all
* X440-24t.20 # show avb
gPTP status : Enabled
gPTP enabled ports : *1d 2d *3d 4d *5d
6d 7d 8d 9d 10d
11d 12d 13d 14d 15d
16d 17d 18d 19d 20d
21d 22d 23d 24d

MSRP status : Enabled
MSRP enabled ports : *1 2 *3 4 *5
6 7 8 9 10
 
0 Kudos

Sangeeta_Ghanga
New Contributor
In response to Sangeeta_Ghanga

‎09-26-2018 09:38 PM

Just wanted to update, I solved this by ensuring neighour-threshold is high enough so NRR is <1.0
0 Kudos

Drew_C
Valued Contributor III

‎09-19-2018 08:30 PM

HI Sangeeta,
The first thing I would recommend is using a proper release version of EXOS and not a beta version. EXOS 15.2.0.26 is not supported in any way.
Either v16.2.5.4-patch1-3 (to be posted soon) or v16.2.4.5-patch1-8 are the recommended versions.

0 Kudos
GTM-P2G8KFN