guest authentication with external captive portal on wired network

[santhosh_kumar]

i have extreme switches which are enabled with dot1x in those switches i would like to enable external capative portal authentication for guest users could you please help in the configuration for this setup

[Sumit_Tokle]

Following was my config partial infomation (for netlogin)

create vlan "Temp"
configure vlan Temp tag 1164
configure vlan Temp ipaddress 192.168.100.1 255.255.255.0

configure radius netlogin primary server x.x.x.x 1645 client-ip x.x.x.y vr VR-Default
configure radius netlogin primary shared-secret encrypted x.x.x.x
enable radius netlogin

configure netlogin vlan Temp
enable netlogin web-based
configure netlogin web-based authentication database-order radius
enable netlogin ports 13-18 web-based
configure netlogin base-url "sutokle.cisco.com"
configure netlogin redirect-page "http://sumittokle.extremenetworks.com"

configure dns-client add name-server x.x.x.x vr VR-Default
configure dns-client add name-server x.x.x.x vr VR-Default
configure dns-client add domain-suffix x.x.x.

enable sntp-client
configure vlan Temp dhcp-address-range 192.168.100.10 - 192.168.100.50
configure vlan Temp dhcp-options default-gateway 192.168.100.1

enable web http

[Tim_DeNike]

www.packetfence.org

[Azharudeen_VM]

can u any one help how to configure captive portal configuration wired and wireless via NAC manager

venkatachalam.P