How to check SNMP traps sent status?

[Paul11]

How to check SNMP traps sent status?

i have configure port up/down trap. But i can't see any trap Sent to SNMP server?
enable snmp traps port-up-down ports all

Appreciate your help. Thanks.

SW.30 # sh management

Total Read Only Communities : 2
Total Read Write Communities : 1
RMON : Disabled
SNMP access : Enabled
: Access Profile : not set
SNMP Compatibility Options :
IP Fragmentation : Disallow
SNMP Traps : Enabled
SNMP v1/v2c TrapReceivers :
Destination Source IP Address Flags Timeout Retries
10.10.50.154 /162 2ET - -
10.10.50.30 /162 2ET - -

Flags: Version: 1=v1 2=v2c 3=v3
Mode: S=Standard E=Enhanced
Notification Type: T=Trap I=Inform

SNMP stats: InPkts 819 OutPkts 819 Errors 0 AuthErrors 0
Gets 819 GetNexts 0 Sets 0 Drops 0
SNMP traps: Sent 0 AuthTraps Enabled
SNMP inform: Sent 0 Retries 0 Failed 0

SW.30 # sh configuration "snmp"
#
# Module snmpMaster configuration.
#
configure snmpv3 add community private01 name private01 user v1v2c_rw
configure snmpv3 add community public name public user v1v2c_ro
configure snmpv3 add community public01 name public01 user v1v2c_ro
configure snmpv3 add target-addr v1v2cNotifyTAddr1 param v1v2cNotifyParam2 ipaddress 10.10.50.154 transport-port 162 vr VR-Default tag-list defaultNotify
configure snmpv3 add target-addr v1v2cNotifyTAddr3 param v1v2cNotifyParam4 ipaddress 10.10.50.30 transport-port 162 vr VR-Default tag-list defaultNotify
configure snmpv3 add target-params v1v2cNotifyParam1 user v1v2cNotifyUser1 mp-model snmpv2c sec-model snmpv2c sec-level noauth
configure snmpv3 add target-params v1v2cNotifyParam2 user v1v2cNotifyUser2 mp-model snmpv2c sec-model snmpv2c sec-level noauth
configure snmpv3 add target-params v1v2cNotifyParam4 user v1v2cNotifyUser4 mp-model snmpv2c sec-model snmpv2c sec-level noauth
Singapore-SW.31 #

[Paul11]

Hi Drew,

we may close the case. by using "sh management" and snmp trap will sent out, eg. link up/down.

Thanks for your review.

[Drew_C]

Hi Paul,
I'm checking up on older threads and wanted to see if you were able to get this one sorted out.

[Paul11]

what is the below configuration result please.

# Module idMgr configuration.
enable snmp traps identity-management

# Module lldp configuration.
configure lldp snmp-notification-interval 5

-Paul

[Paul11]

i have try that command "configure snmpv3 add group xxxxx" but still the same.
no snmp trap sent.