When do LEAP Second Security Vulnerability will happen again in end of December 2016???
Is Vulnerability or 2015 002 or any Leap Second going to happen end of this December 2016???
I want to use solarwinds Network Performance Monitor to manage Extreme switches x150, x250, x450 etc.
SolarWinds Community String : solarsnmp
Read Only
Version 2
How to create SNMP configuration on the switch? Please provide the CLI command?
how to configure snmp trap to send only when linkup linkdown.
i don't want other alarm. only for linkup and linkdown.
the switch will only send traps for linkUp and linkDown?
System Type: X250e-24t
Secondary ver: 12.1.3.14
What is the fix for X440-24t Temperature Very Hot Warning Error???
This is newly buy X440-24t and this temp err is happening. Please advice.
I saw a lot of post regarding this X440-24t temperature error.
I have upgraded to Recommended Release 1...
1. How can i send the Port description via SNMP trap when link up/down events occur. 2. Hostname together with Device IP address when snmp events send? Currently only IP address can see from snmp server. Really Appreciate your help. Than...
One more thing, our setup
NTP is running as a NTP server on the X450a-24x firmware 15.3.3.5 patch1-6 windows server (NTP client) is getting NTP time from Extreme X450a.
we are not getting any NTP from outside. NTP Server is Exteme x450a.
Will th...
One more thing, our setup
NTP is running as a NTP server on the X450a-24x firmware 15.3.3.5 patch1-6 windows server (NTP client) is getting NTP time from Extreme X450a.
we are not getting any NTP from outside. NTP Server is Exteme x450a.
Will th...
Thanks Karthik,
so i no need to care about timezone on the switch. as long as i have enable NTP. I should disable it as below?
disable ntp at 23:59:00 PM, 30 Dec, 2017
enable ntp at 23:59:0 PM, 1 January, 2017
