10-14-2019 09:31 AM
10-15-2019 06:41 AM
Thanks, Stephen for the information But unfortunately my core switch firmware is 21.1.3.7 and needs to upgrade 22 or above.
Thank you very much.
10-14-2019 07:01 PM
That’s good news! Previously a conversion to a stack made the switch wipe the entire config, which was kind of annoying if the stack was like 500 km away… Gihan and everyone else: make sure you have the old config saved in other places than the switch just in case the stack conversion goes horribly wrong! Apparently this is a new feature and with any vendor I’d say you shouldn’t trust it just yet.
/Fredrik
10-14-2019 12:41 PM