how to configure ssh on extreme X450e-48t

[Mohammad_Alshaw]

please help me to configure ssh over my network, I have the following switch with the following details :

* AMM-GF-SW05.1 # sh version
Switch : 800391-00-01 1201G-81983 Rev 1.0 BootROM: 1.0.5.6 IMG: 12.5.1.6
XGM2-1 : N/A N/A Rev 0.0

Image : ExtremeXOS version 12.5.1.6 v1251b6 by release-manager
on Tue Nov 23 09:49:14 PST 2010
BootROM : 1.0.5.6
* AMM-GF-SW05.2 # sh switch

SysName: AMM-GF-SW05
SysLocation:
SysContact: support@extremenetworks.com, +1 888 257 3000
System MAC: 00:04:96:52:FB:75
System Type: X450e-48t

SysHealth check: Enabled (Normal)
Recovery Mode: All
System Watchdog: Enabled

Current Time: Wed Dec 13 12:58:53 2017
Timezone: [Auto DST Disabled] GMT Offset: 0 minutes, name is UTC.
Boot Time: Sun Apr 9 23:12:16 2017
Boot Count: 36
Next Reboot: None scheduled
System UpTime: 247 days 13 hours 46 minutes 37 seconds

Current State: OPERATIONAL
Image Selected: primary
Image Booted: primary
Primary ver: 12.5.1.6
Secondary ver: 12.5.1.6

Config Selected: primary.cfg
Config Booted: primary.cfg

primary.cfg Created by ExtremeXOS version 12.5.1.6
201155 bytes saved on Tue Dec 12 08:52:56 2017

[Mohammad_Alshaw]

can you give me the link for install the SSH mode

[Drew_C]

https://extremeportal.force.com/ExtrDownloadDetail?id=a4134000000Dm4NAAS

[Ronald_Dvorak]

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-obtain-and-install-ssh-module

[Darren_Saliva]

You need to install the SSH mod for that firmware version. I believe you need an active support contract on it to be able to log into the extreme support portal and download the mod.