How to disable ntp in ExtremeXOS.

[Taner_Yamak]

how to disable ntp in ExtremeXOS?
I tried some commands as "disable ntp" but many times it through this error: %% Invalid input detected at '^' marker.
Help me, please.
Thanks.

[Andrew_Maldonad]

Taner,

If you are upgrading to EXOS 15.5 the NTP can be configured without the "run update" command or a separate ntp.xmod image.

If you are upgrading to EXOS 15.3 the commands mentioned are correct.

-Andrew

[Drew_C]

Hi Taner,
NTP wasn't available until EXOS 12.7 and required a separate XMOD until EXOS 15.5. Since your switch is on 12.6, NTP isn't available.

[Taner_Yamak]

Hi Paul,

When I write "sh process ntp" command I get same error again.
^
%% Invalid input detected at '^' marker.
---------------------------------------------------------------------------------
How to disable ntp after install image?

[Taner_Yamak]

Hello Andrew,

This is images version:

Card Partition Installation Date Version Name Branch------------------------------------------------------------------------------
Switch primary Mon Nov 5 13:27:25 UTC 2012 12.6.2.10 summitX-12.6.2.10.xos v1262b10
Switch primary Mon Nov 5 13:45:43 UTC 2012 12.6.2.10 summitX-12.6.2.10-ssh.xmod v1262b10
Switch secondary Mon Nov 5 13:18:14 UTC 2012 12.6.2.10 summitX-12.6.2.10.xos v1262b10
Switch secondary Mon Nov 5 13:44:42 UTC 2012 12.6.2.10 summitX-12.6.2.10-ssh.xmod v1262b10

[Paul11]

Taner,

Please update the following output.

sh version image
sh process ntp

You need to disable SNTP in order to work NTP.
SNTP and NTP cannot run together.

Need to Install NTP module to switch for 15.x.x.x
install image "summitX-15.3.3.5-patch1-6-ntp.xmod"
run update

-Paul

FYI. Thanks.
https://community.extremenetworks.com/extreme/topics/can-the-bd8810-be-used-as-a-ntp-server