How to view IP address with known MAC address in EXOS

[shashank_sharma]

what should i do ? if i know the MAC address of the user and i want to get his ip . If its possible then please give me command for extreme switches.

[Mateusz_Haba]

@Ronald - that clarifies much but still can't see any IP/MAC while giving:

show nodealias port 1:39

[Mateusz_Haba]

Mac Vlan Age Flags Port / Virtual Port List
--------------------------------------------------------------------------------
d8:9e:f3:05:04:2d DMZ(100) 0055 nd m v 1:39

Flags : d - Dynamic, s - Static, p - Permanent, n - NetLogin, m - MAC, i - IP,
x - IPX, l - lockdown MAC, L - lockdown-timeout MAC, M- Mirror, B - Egress Blackhole,
b - Ingress Blackhole, v - MAC-Based VLAN, P - Private VLAN, T - VLAN translation,
D - drop packet, h - Hardware Aging, o - IEEE 802.1ah Backbone MAC,
S - Software Controlled Deletion, r - MSRP,
X - VXLAN, Z - OpenFlow

Total: 133 Static: 0 Perm: 0 Dyn: 133 Dropped: 0 Locked: 0 Locked with Timeout: 0
FDB Aging time: 300

* X440-19 # show nodealias mac d8:9e:f3:05:04:2d
Port MAC Address Alias ID Time Last Learned VID Protocol Source IP
----- ----------------- ---------- ------------------- ---- -------- ---------------

[Ronald_Dvorak]

and "show fdb ports 1:39"

[Mateusz_Haba]

Load Sharing Monitor
Config Current Agg Min Ld Share Dist Ld Share Agg Link Link Up
Master Master Control Active Algorithm Flags Group Mbr State Transitions
================================================================================
1:48 1:48 LACP 1 L3_L4 A 1:48 Y A 0
L3_L4 2:48 Y A 0
================================================================================
Link State: A-Active, D-Disabled, R-Ready, NP-Port not present, L-Loopback
Minimum Active: (<) Group is down. # active links less than configured minimum
Load Sharing Algorithm: (L2) Layer 2 address based, (L3) Layer 3 address based
(L3_L4) Layer 3 address and Layer 4 port based
(custom) User-selected address-based configuration
Custom Algorithm Configuration: ipv4 L3-and-L4, xor
Distribution Flags:
A - All: Distribute to all members,
L - Local Slot: Distribute to members local to ingress slot,
P - Port Lists: Distribute to per-slot configurable subset of members,
R - Resilient Hashing enabled.
Number of load sharing trunks: 1

Port 1:39 is a DMZ port (if this would help)