ExtremeSwitching (EXOS/Switch Engine) - Page 401 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

XOS upgrade question

We have our big maintenance window on a weekend, I need to upgrade the XOS image on several devices, can I pre-load the image and install the new image on the non working partition before the schedule window, so then I can just reboot with the new so...

how to configure ssh on extreme X450e-48t

please help me to configure ssh over my network, I have the following switch with the following details : * AMM-GF-SW05.1 # sh version Switch : 800391-00-01 1201G-81983 Rev 1.0 BootROM: 1.0.5.6 IMG: 12.5.1.6 XGM2-1 : N/A N/A ...

ezspantree crashes when I run it

I'm finally setting up my first EXOS switch, and while I think I have configured it with a single STP domain in MSTP with all VLANs and ports in it, I decided to enable ezspantree.py to be sure. However, when I run it, I get the following crash: * jb...

Is it suported to have a multicast PTP Grandmaster for boundary/ordinary clock setup?

I'm trying to setup an EXOS device as boundary or ordinary clock, but our grandmaster is set up to work in multicast. Reading documentation, I've just seen examples for unicast grandmasters. Is it possible to sync to a multicast grandmaster?

usb firmware update

Please see this link.. https://extremeportal.force.com/ExtrArticleDetail?an=0000817946 months ago this was not possible to do on X440G2 and 620 switches.. My question today is that if I am on firmware 22.3.1.4 on a Gen2 X440.... Am I able to follow t...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN