Hi everybody,
We have some problems about our new BD88K boot time ā 40 min
We have 29 policys (1000 ACLs) on production, however with the same configuration on our previous BD10K, the boot time lasted 5 min.
We have the same problem with these versions:
Primary ver:      16.1.2.14                    
Secondary ver:    15.7.2.9   
During the boot, a show slot command display "ACL sync".
Furthermore, a show slot give:
Slots    Type                 Configured           State       Ports  Flags-------------------------------------------------------------------------------
Slot-1   8900-40G6X-xm        8900-40G6X-xm        Operational   24   MB
Slot-2   8900-10G24X-c        8900-10G24X-c        Operational   24   MB
Slot-3   8900-10G24X-c        8900-10G24X-c        Operational   24   MB
Slot-4                                             Empty          0
Slot-5                                             Empty          0
Slot-6                                             Empty          0
Slot-7   G48Tc                G48Tc                Operational   48   MB
Slot-8                                             Empty          0
Slot-9   8900-G48X-xl         8900-G48X-xl         Operational   48   MB
Slot-10  8900-G48X-xl         8900-G48X-xl         Operational   48   MB
MSM-A    8900-MSM128                               Operational    0
MSM-B    8900-MSM128                               Operational    0
Do you have any information about this problem?
Best Regards,
Network Engineer