ExtremeSwitching (EXOS/Switch Engine) - Page 178 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Help creating OSPF export with static routes, with specific tags and cost.

HiThe static routes are as follows:configure iproute add 10.1.0.0 255.255.0.0 172.16.2.10configure iproute add 20.150.27.0 255.255.255.0 172.16.2.10What I would like to do is redistribute those examples into OSPF with the first route using a tag of 2...

Resolved! BGP community attribute configuration

Hi,I need to advertise BGP community strings to my ISP.I am advertising several networks, and for each of these networks I need to send either 123:1 or 123:2 - where the ISP AS number is 123. This will then be used by the ISP to set a local preferenc...

Resolved! Network issues on one wireless vlan after switch upgrade

Hi,We just upgraded our core switches from X440 to X440G2-10G4’s. 3 in a stack. Since the upgrade we have been seeing a large amount of high pings on our Wireless Vlan and sometimes devices unable to connect out side the network. Device’s can get DHC...

Getting .csv data / machine readable data from Flex reports

Hello friends - I’ve been asked to generate some analytics from data within Extreme, specifically set up some alerts on bandwidth by ports; i.e., tell the customer when a port in range (x-z) exceeds/exceeded bandwidth threshold y. But I cannot figur...

ELRP implementation question

Hello…Is it o.k. if I only configure one specific vlan for ELRP implementation accros all my devices and just tag the ports to it (excluding the uplinks)? Is there like a “Best practice” document to implemented for loop protection?Thanks

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN