I have a large network where traditionally we have used a single RP with 224.0.0.0/4 .
Traditionally we have allowed any client to add an Mcast stream and this has always used the configured RP point with the catch all rule.
We have notes a massive increase in systems using mcast , as a management and operational tool , that don't need the mcast RP and if they do ( AV for example ) flood the uplinks to the cores.
I would like a simple command , or group of commands that I could run on our cores , that would display , the source and the mcast IP address , so that we can start managing the mcast streams and modify teh RP " catch all " to more specific addesses , and or configure specific RP's for specific streams
