ExtremeSwitching (EXOS/Switch Engine) - Page 446 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

SSL module for x450a24t in home lab environment

Hi there, i have an x450a24t in a home lab environment, and as such have no warranty or support on this device.I am looking to get HTTPS access setup and I believe i need the ssl module to do this.Does anybody have a copy of this they might be able t...

permit only specific mcast groups

Hi, all! I need to permit only specific mcast groups (for example 239.1.1.1 and 239.2.2.2), other - deny. EXOS 15.3 For this moment I havn't possibility to test this case. Can somebody tell me - would it be working ACL: entry SeparateMcast { if...

Jumbo frames configured though dell devices will not respond to a mtu size set for more than 8976

Jumbo fames enabled for L2 and L3. If I ping between two extreme switches with an MTU of 9000 , I get an appropriate response, basically it works as expected. ping vr "VR-Default" start-size 9000 10.2.7.1 Ping(ICMP) 10.2.7.1: 4 packets, 9000 ...

oid dhcp

I need oid (or tree) to see dhcp leases from my extreme x450a-24x. And also need how to configure dhcp server(static mac+ip) via snmp. Thanks a lot

wake on lan - WOL

Hello, We currently use IP directed broadcast to allow wake on LAN for our 460-48p (G1) switches running 16 code. On occasion we'll have a field tech tell us that WOL isn't working.Other than confirming that the ip directed broadcast settings are on ...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN