Image upload/install error: Error: File COUGAR is not for SUMMIT_KEY.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎03-16-2015 04:53 PM
Good day all! I'm new to Extreme so please forgive any newbie(ness) to my question.
I was given an image name of summitX-15.4.2.8.xos to install to several Summit X430-24t switches. But I'm getting an error of:
Error: File COUGAR is not for SUMMIT_KEY.
So I decided to go to the Extreme support d/l page and plugged in the serial # of one of the switches (10 new ones to update) and I get an image name with "lite" (summitlite-15.4.2.8.xos) in it. Is there an lite version of the Summit xos? I'm wondering if this error I'm getting is because the summitX-15.4.2.8 is the wrong image.
The show version:
show versionSwitch : 800542-00-04 1402N-43685 Rev 4.0 BootROM: 1.0.1.1 IMG: 15.3.2.11
PSU-1 : Internal Power Supply
Image : ExtremeXOS version 15.3.2.11 v1532b11 by release-manager
on Tue Jun 18 15:28:54 EDT 2013
BootROM : 1.0.1.1
Diagnostics : 1.3
Thanks much all!!
I was given an image name of summitX-15.4.2.8.xos to install to several Summit X430-24t switches. But I'm getting an error of:
Error: File COUGAR is not for SUMMIT_KEY.
So I decided to go to the Extreme support d/l page and plugged in the serial # of one of the switches (10 new ones to update) and I get an image name with "lite" (summitlite-15.4.2.8.xos) in it. Is there an lite version of the Summit xos? I'm wondering if this error I'm getting is because the summitX-15.4.2.8 is the wrong image.
The show version:
show versionSwitch : 800542-00-04 1402N-43685 Rev 4.0 BootROM: 1.0.1.1 IMG: 15.3.2.11
PSU-1 : Internal Power Supply
Image : ExtremeXOS version 15.3.2.11 v1532b11 by release-manager
on Tue Jun 18 15:28:54 EDT 2013
BootROM : 1.0.1.1
Diagnostics : 1.3
Thanks much all!!
2 REPLIES 2
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎03-16-2015 06:31 PM
Thanks much Bill!
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎03-16-2015 05:51 PM
Garry,
The X430 is a L2 only switch and uses the images named SummitLite only, they are smaller versions of code without the L3 features. When you try to install the Summitx image you get the error that you outline, get the lite version and you will be good to go!
Bill
The X430 is a L2 only switch and uses the images named SummitLite only, they are smaller versions of code without the L3 features. When you try to install the Summitx image you get the error that you outline, get the lite version and you will be good to go!
Bill
