IP CAM performance issue with X450 G2

[Arjumand_Qazi]

Hello, looking for a possible solution, just unboxed X450 G2 and connected IP Cams to it, it should work smoothly. but here video is not stable and lagging.

[Erik_Auerswald]

Additional interesting command output would be from
show port configuration no-refresh

[Ronald_Dvorak]

yes, could you please post the output/screenshot of the following commands...

show switch
show port no-refresh

And please tell us the ports that have the cams connected.

[Arjumand_Qazi]

hello, the switch in default configuration will have only auto sensing right ?

[Ronald_Dvorak]

I'd check what the guys above mentioned - running the wrong port speed sounds plausible.
Might be that the port runs at 10/half.

[Arjumand_Qazi]

I am sorry gentlemen but is this a normal behavior of sumit switch?