Is it possible to do a firmware update on a Summit using xmodem/serial port

[Nico_Lueck]

Can't find any description about it..

[Drew_C]

The ExtremeWare products (S200, S300, S400, 48si, etc.) allowed xmodem transfer for code, but the images were much smaller. On EXOS based hardware, this isn't possible.

[StephenW]

xmodem took MANY hours when i had to do it. Especially if you didn't change the console speed.

[Nico_Lueck]

That was more a theoretical question, as for SecureStack it is possible

[Alexandr_P]

Hello, Nico!

No, you can't upgrade through serial.

Also you have to think (if it were possibile (teoretically)) - how long it takes to download image (50MB) with speed 9,6 kbit/sec?

Thank you!