LACP between Enterasys S-Series and Extreme SummitX XOS16.1

[Jens_Podbiera]

Hey Guys,

need a little bit assistance for a LACP (2 sfp+ ports) between the Enterasys S Series and a Extreme SummitX X670G2-48x-4q .

Found some example for Extreme:

enable sharing 10 grouping 10-12 lacp
configure sharing 10 lacp system-priority 3
configure sharing 10 add port 5

The Enterasys Side is no problem, but is that realy all what i have to do?
Admin Key? e.t.c?

regards

Jens

[OscarK]

Normally only the enable sharing command is enough to get lacp working.
To get proper distribution between the ports using a good load share algorithm is advised, preferably L3_L4. See this document.
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-or-delete-a-share-group-in-E...

[Bill_Stritzinge]

Jens,

No ... it is simpler than that.. On the XOS side it is just one line...

enable sharing grouping lacp

So.. if you have port 1,2 on the xos side:

enable sharing 1 grouping 1,2 lacp

Bill