ExtremeSwitching (EXOS/Switch Engine) - Page 108 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Please check the corresponding config.

I want to advertise the OSPF interlink below as well.Are the settings below correct? v10 uplink vlanv350 user vlan <A>create vlan v10 tag 10configure vlan v10 add port 24 untagconfigure vlan v10 ipaddress 10.1.40.3/24 enable ipforwarding ...

Resolved! V300 (Port Extender) - Noise informations

Unfortunately V300 - Datasheet does not give information about fan and noise values during switch running (table “fan and acustic noise” is missed) . V300-8P-2X | V300HT-8P-2x | V300HT-8T-2x are fanless - so they works silent But what about V300-8T-X...

Resolved! VLAN help on X440's

I am pretty new to setting up VLANS and I am needing to setup some on one of my networks. Here is what I have come up with so far.Total of 6 VLANSMgmtDefualtServices 10.20.0.1/24 VLAN 2 (Shared resources, Printers, File, Print and Data servers)Staf...

Resolved! Same Phone, Same LLDP Config. One detecting Voice VLAN the other not?

HI Have a strange issue with Mitel phones that seem to be same model, same firmware, but some are detecting the Voice VLAN via LLDP, whereas others are not, yet config is identical.In fact I can’t see any different between the two, but yet the majori...

Resolved! EXOS Mirror Ingress to Egress on the same physical port.

When using an EXOS switch I would like to take all ingress traffic on a port and turn it right back around and have it egress on the same port. Like a reflector. Why would I want to do that!? The NetAlly NXG tester using the new LANBERT function al...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN