Lag X460G2 CCR1009

[Bruno]

Hi, im having a issue while tring to bond 2 ports between a x460-g2 and a mikrotik ccr1009. My TX traffic get balanced but there is no way to balance RX.

I've tried using 802.3ad, L2, L3, L3_L4 and custom, with and without lacp, updated routerOS, but get no results.

This is

Config for X460G2 and CCR1009 as follow:

Thank you in advance 🙂

[Patrick_Voss]

Hello Bruno,

Depending on the traffic flow it might be difficult to "balance" the traffic considering it is not processed in a round robin fashion. Are there multiple VLANs on this port?

[Bruno]

Hello, thanks for the fast reply  im looking from ccr1009 perspective so the packets x460 is sending aren't balanced;

[Patrick_Voss]

Hello Bruno,

Are you referring to the RX traffic from the perspective of the x460? If so the "balancing" would happen on the other side. The LAG algorithm is only going to come in play for egress traffic.