Manage 2 swtiches summit x440

[meinguer]

Hello! I´m new in the communty so if the tittle or the tags are wrong an apoligize and I really appreciate that you can tell me in order to change it

I´m have my sw in production, and everything works fine with the vlans and the traffic the only probIem is that I don´t really know to manage my switches, i already put an ip to my sw but i cannot ping them,i have several extreme swtiches, and this are the models X440-24x-10G, Summit X440-48t, Summit X440-L2-48t.

In the Sw core (x440-24x-10G) i have my vlans with ip, and i have the default vlan with this configuration, 

configure vlan Default ipaddress 172.23.10.250 255.255.255.0
enable ipforwarding vlan Default

configure vlan Default add ports 1 tagged
configure vlan Default add ports 2-7,19,21-22 untagged

In my sw X440-48t

configure vlan Default ipaddress 172.23.10.53 255.255.255.0
enable ipforwarding vlan Default

configure vlan Default add ports 47-48 tagged

I see that i don´t tag the port of the conection in my sw Core, the conection in my x440-24x-10G is the port 7, and in the sw w X440-48t is the port 47

[meinguer]

I did that but no, I cannot see it, I run the show iparp port 7 and just send me the IP's of my computers but nothing about the IP of the SW, and I just run the command as you recommend me and this is what shows

X440-24x-10G.8 # show iparp 172.23.10.53
VR            Destination      Mac                Age  Static  VLAN          VID   Port

Dynamic Entries  :         157             Static Entries            :          0
Pending Entries  :           2
In Request       :    19396226             In Response               :      89321
Out Request      :    10823483             Out Response              :    2701390
Failed Requests  :     1788024
Proxy Answered   :           0
Rx Error         :           0             Dup IP Addr               :         0.0.0.0
Rejected Count   :     1166517             Rejected IP               :   169.254.90.91
Rejected Port    :           1             Rejected I/F              : administrativos

Max ARP entries  :        8192             Max ARP pending entries   :        256
ARP address check:    Enabled              ARP refresh               :    Enabled
Timeout          :          20 minutes     ARP Sender-Mac Learning   :   Disabled
Locktime         :        1000 milliseconds
Retransmit Time  :        1000 milliseconds
Reachable Time   :      900000 milliseconds (Auto)
Fast Convergence :         Off
 

after the succes of my ping now i got the info

X440-24x-10G.10 # show iparp 172.23.10.53
VR            Destination      Mac                Age  Static  VLAN          VID   Port
VR-Default    172.23.10.53     00:04:96:98:33:81    1      NO  Default       1     7

Dynamic Entries  :         158             Static Entries            :          0
Pending Entries  :           5
In Request       :    19397926             In Response               :      89328
Out Request      :    10825985             Out Response              :    2701609
Failed Requests  :     1788438
Proxy Answered   :           0
Rx Error         :           0             Dup IP Addr               :         0.0.0.0
Rejected Count   :     1166517             Rejected IP               :   169.254.90.91
Rejected Port    :           1             Rejected I/F              : administrativos

Max ARP entries  :        8192             Max ARP pending entries   :        256
ARP address check:    Enabled              ARP refresh               :    Enabled
Timeout          :          20 minutes     ARP Sender-Mac Learning   :   Disabled
Locktime         :        1000 milliseconds
Retransmit Time  :        1000 milliseconds
Reachable Time   :      900000 milliseconds (Auto)
Fast Convergence :         Off
 

[meinguer · Accepted solution]

I did this and yes! now i can ping my sw 🙂

X440-24x-10G.9 # ping 172.23.10.53
Ping(ICMP) 172.23.10.53: 4 packets, 8 data bytes, interval 1 second(s).
16 bytes from 172.23.10.53: icmp_seq=0 ttl=64 time=19 ms
16 bytes from 172.23.10.53: icmp_seq=1 ttl=64 time=12 ms
16 bytes from 172.23.10.53: icmp_seq=2 ttl=64 time=12 ms
16 bytes from 172.23.10.53: icmp_seq=3 ttl=64 time=1.749 ms

--- 172.23.10.53 ping statistics ---
4 packets transmitted, 4 packets received, 0% loss
round-trip min/avg/max = 1/11/19 ms
 

[meinguer]

I did that but no, I cannot see it, I run the show iparp port 7 and just send me the IP's of my computers but nothing about the IP of the SW, and I just run the command as you recommend me and this is what shows

X440-24x-10G.8 # show iparp 172.23.10.53
VR            Destination      Mac                Age  Static  VLAN          VID   Port

Dynamic Entries  :         157             Static Entries            :          0
Pending Entries  :           2
In Request       :    19396226             In Response               :      89321
Out Request      :    10823483             Out Response              :    2701390
Failed Requests  :     1788024
Proxy Answered   :           0
Rx Error         :           0             Dup IP Addr               :         0.0.0.0
Rejected Count   :     1166517             Rejected IP               :   169.254.90.91
Rejected Port    :           1             Rejected I/F              : administrativos

Max ARP entries  :        8192             Max ARP pending entries   :        256
ARP address check:    Enabled              ARP refresh               :    Enabled
Timeout          :          20 minutes     ARP Sender-Mac Learning   :   Disabled
Locktime         :        1000 milliseconds
Retransmit Time  :        1000 milliseconds
Reachable Time   :      900000 milliseconds (Auto)
Fast Convergence :         Off
 

[Miguel-Angel_RO]

meinguer,

That depend on what you want to achieve

If you want to tag it type this on the core:

• configure vlan Default add ports 7 tagged

Mig